Asparagus

Slice
Processing of asparagus on the E TranSlicer® Cutter by Urschel such as 1/2, 3/4, 1, 1-1/2, 2, 2-1/4, or 3″ (13, 19, 25, 38, 51, 57, or 76 mm) cuts. Approximate hourly capacity: 12,000 to 15,000 lb (5,000 to 7,000 kg). Suggested use of optional spring-loaded top plate hold-down assembly and use of a lane-orienting, vibratory feeder to provide proper longitudinal feeding.

Paste | Puree
A wide range of particle sizes suitable for soups, infant feeding, and special diet requirements can be obtained from raw, canned, or frozen asparagus pieces. Use microcut heads for the finest degree of reduction at capacities up to 12,000 lb (5,400 kg) hourly using 9,390 revolutions per minute impeller speed and 30 horsepower motor. Precut or grind infeed product 1/4″; (6.4 mm) or smaller and pump to the Processor for minimum aeration.

Paste | Puree
COMITROL® PROCESSOR – A wide range of particle sizes suitable for soups, infant feeding, and special diet requirements can be obtained from raw, canned, or frozen asparagus pieces. Choose from a wide selection of cutting head opening sizes for particle sizes larger than 1/64″ (0.4 mm). Approximate hourly capacity of 1/16″ (1.6 mm) particles using 5,634 revolutions per minute impeller speed and the Comitrol® Processor Model 1700: 7,500 lb (3,400 kg). Use microcut heads for finest degree of reduction at capacities up to 12,000 lb (5,400 kg) hourly using 9,390 revolutions per minute impeller speed and 30 horsepower motor. Chop or grind product 1/4″ (6.4 mm) or smaller and pump to the Processor for minimum aeration.

Coarse Puree
COMITROL® PROCESSOR – A wide range of particle sizes suitable for soups, infant feeding, and special diet requirements can be obtained from raw, canned, or frozen asparagus pieces. Choose from a wide selection of cutting head opening sizes for particle sizes larger than 1/64″ (0.4 mm).

Paste | Puree
A wide range of particle sizes suitable for pastes, soups, infant feeding, and special diet requirements. Chop or grind product 1/4″. (6.4 mm) or smaller and pump into the Processor for minimum aeration.
The 9310 offers a built-in HMI and features the highest capacity in the Comitrol line. The 9310 features the highest capacity with the most powerful motor combined with the largest microcut head configuration.