Multicorer (4B/2B)
Cutting, Preparing
The Multicorer for the automated coring of large quantities of lettuce, cabbage and other products with a maximum diameter of 240 mm (9.5″) considerably reduces the personnel requirement in preparation.
up to 2,400 pieces/h Max. capacity
- Features
- Specs
- Resources
Overview
Automated coring and dividing of large quantities of lettuce, cabbage or peppers
The Multicorer prepares products such as iceberg lettuce, frisée, endive, radicchio or red and white cabbage (generally round cabbage varieties), as well as peppers, for subsequent processing steps by coring and dividing them.
Operation of the machine during processing is very simple: the product is placed onto the product holders with the stalk facing downwards by one person. The diameter of the processed products may not exceed 240 mm (9.5″). The plates with the product holders move in the direction of the cutting unit at the set speed – with up to 20 cycles per minute. There, the products are cored and divided into two or four segments. The pieces of the product are transported further and discharged onto an optional discharge conveyor located at the end.
All cutting cassettes can be changed quickly with no tools required.
The cutting machine is available in two versions: the standard model has four lanes, but it is also available with two lanes.
Your Benefits
- Automated coring and dividing enable large quantities to be processed
- Reduced personnel requirement in the preparation of products
- Possibility to divide products in preparation for further processing steps
- Simultaneous processing of different products possible
Highlights
Process different products at the same time
As an option, each of the four or two lanes can be individually adjusted to suit a different product, so that up to four different products can be processed at the same time.
Can be adapted to process a multitude of products
The cutting process can be specifically adjusted to suit the product to be processed, enabling different stalk sizes in cabbage and various types of lettuce to be accommodated. The stalk is completely removed with the least possible waste.
Simple operation and low personnel requirements
Due to the simple operation and loading procedure, the Multicorer can be operated by one single person. This makes it possible to achieve significant increases in productivity and a reduction in the number of personnel required for preparation.
Efficient processing with a high capacity
With just one person, large quantities can be processed efficiently in the Multicorer with a capacity of up to 2,400 pieces per hour.
Specs
| Max. Capacity | up to 2,400 pieces/h (The capacity depends on factors such as the product.) |
| Operator | Semi-automatic |
| Electrical power | Power: 7.2 kW (9.7 HP) Voltage: 400 V / 200 V Frequency: 50 Hz |
| Water | Fresh water connection: 32 l/min. at 2 bar (GK coupling) |
| Air | Working pressure: 6-7 bar Air consumption: 414 NL/min. |
| Dimensions | LxWxH: 3725 x 2670 x 2440 mm (146.7 x 105.1 x 96.1″) Weight: 1525 kg (3360 lb) Infeed/placement height: 1020 mm (40.2″) Outfeed/delivery height: 660 mm (26″) waste |
| Miscellaneous | Diameter of raw product: max. 240 mm (9.4″) Height of raw product: max. 240 (9.4″) Cycles per hour: max. 1200 |
Industries
Vegetables
Salads
Resources
Photography
Videos
Brochures
Multicorer (4B/2B)