• Tool-free and expedited knife changeovers — with no fasteners and little to no tools needed. With proven quick-clamping (patent pending) technology, changeovers are as fast or even faster than an 8-station head.
• At 35 lb (16 kg) with built-in lifting handles, the SL-14 is adeptly removed and replaced.
• 14 identical, ideally-spaced cutting stations maximize slice engagement to amplify productivity — almost double the capacity. Modular block design does not incorporate shims or shoes.
• Stationary (fixed) knife position — the knife holder and knife edge remain fixed during micro-adjustments and throughout production runs.
• Delivers maximum cutting action with 14 cutting stations versus the fully-adjustable, standard head with 8 cutting stations — almost doubling the capacity.
• Expedient knife changeovers - quick-release clamping mechanism (patent pending) expedites changeovers – with little to no tools needed.
• Quick-set slice thickness with a simple turn of the adjustable screws.
• Maintains strict tolerances throughout production runs with the ability to easily micro-adjust slices using top/bottom adjustable screws by flexing the adjustable gate while the knife holder/knife edge remain in a fixed position.
• Fits in place of standard double-ring, double-adjustment heads using self-locking lower ring. No need for any special adapter. Uses standard impeller or new, optional grooved impeller.
• Lightweight 35 lb (16 kg) with built-in handles to ease lifting
• New modular block design does not incorporate shims or shoes; 14 sets of identical blocks surround the head with ideal spacing to actively maximize slice engagement.
• Slice range: While the standard 8-shoe head offers a full range of slice thickness adjustment up to .500" (12.7 mm), the new SL-14 offers simple, micro-adjustability in a range of .033" (.8 mm) as outlined on back cover.
• Smooth slice surface leads to minimal micro-cracking, oil absorption, and starch loss.
• Offers inexpensive knife holders and clamps that are easily replaced when rock damage occurs.
• Different knives are available to extend runtimes, and reduce the number of knife changes. Specially crafted sanitary stainless steel knife features increased production longevity through greater durability, corrosive-resistance, and sharpening capability.
• Offers inexpensive knife holders and clamps that are easily replaced when rock damage occurs.
• Widely tested on all sizes of potatoes and a variety of other products with successful results.
• Patented, optional grooved-style impeller improves feeding rate and minimizes scrap by reducing repeated misengagement with smaller potatoes, while also effectively stabilizing larger potatoes to deter tapered slices.

• ​MicroAdjustable Slicing Heads offer maximum flexibility. Choose to run in optimal, precision mode to yield ideal slices, or run in the extended mode, depending on targeted production requirements.

• Slice thickness ranging from .030 – .203" (.760 – 5.16 mm) are produced when a flat slicing head is used.
  6 heads available in thickness ranges listed below:
  • Optimal .040 – .060" (1.02 – 1.52 mm) or
    Extended .030 – .063" (.76 – 1.60 mm)
  • Optimal .060 – .080" (1.52 – 2.03 mm) or
    Extended .050 – .083" (1.3 – 2.11 mm)
  • Optimal .090 – .110" (2.29 – 2.79 mm) or
    Extended .080 – .113" (2.03 – 2.87 mm)
  • Optimal .120 – .140" (3.05 – 3.56 mm) or
    Extended .110 – .143" (2.79 – 3.63 mm)
  • Optimal .150 – .170" (3.81 – 4.32 mm) or
    Extended .140 – .173" (3.56 – 4.39 mm)
  • Optimal .180 – .200" (4.57 – 5.08 mm) or
    Extended .170 – .203" (4.32 – 5.16 mm)

•  .125" V SLICE*
  .125" (3.2 mm) V Slice has 8 complete “v’s” to the inch. Depth of “v” is .050" (1.3 mm). Slice thickness ranges from .045 – .100" (1.0 – 2.5 mm); Centers: .125" (3.2 mm)
  • Optimal .055 – .075" (1.40 – 1.91 mm) or
    Extended .045 – .078" (1.14 – 1.98 mm)
• .212" V SLICE**
  .212" (5.4 mm) V Slice has 4.7 “v’s” to the inch. Depth of “v” is .084" (2.1 mm). Slice thickness  ranges from .040 – .100" (1.0 – 2.5 mm); Centers: .212" (5.4 mm).
  • Optimal .055 – .075" (1.40 – 1.91 mm) or
    Extended .045 – .078" (1.14 – 1.98 mm)

• Standard Crinkle Slices: 3-1/3 waves to the inch; depth of crinkle is .080" (2.0 mm). Slice thickness from .040 – .285" (1.0 – 7.2 mm); Centers: .300" (7.62 mm).
  • Optimal .050 – .070" (1.27 – 1.91 mm) or
    Extended .040 – .073" (1.02 – 1.85 mm)
  • Optimal .070 – .090" (1.78 – 2.27 mm) or
    Extended .060 – .093" (1.52 – 2.36 mm)

*Quick Clamping **Without Quick Clamping