Model CC-DL Shredder
Model CC-DL
High Capacity Shredder, Slicer, & Strip Cutter
- Rely on the Model CC-DL to shred, slice, strip cut, or granulate a variety of products including cheese, potatoes, other vegetables/fruits, cooked meats, and pet food.
- It features a large 32-inch diameter cutting zone enclosure to promote a higher capacity and diminish product build-up.
- Attached swing away infeed hopper lends to better sanitation and ease of maintenance.
- Large 10 HP (7.5 kW) motor
- The Model CC-DL will accept products measuring up to 3-1/2" (88.9 mm) in any dimension.
- The machine features continuous operation for uninterrupted production, and is designed for easy clean-up and maintenance.
- NEW MicroAdjustable® SH-14 Shred Head, U.S.D.A., Dairy Division accepted, now available.
Applications
Food processors rely on the Model CC-DL to shred, slice, strip cut, or granulate a variety of
products including cheese, potatoes, other vegetables/fruits, cooked meats, and pet food.
It features a large 32-inch diameter cutting zone enclosure to promote a higher capacity and
diminish product build-up. The machine features continuous operation for uninterrupted
production, and is designed for easy clean-up and maintenance. The Model CC-DL will
accept products measuring up to 3-1/2" (88.9 mm) in any dimension.
Machine Specs
Length:
61.66" (1566 mm)
Width:
35.60" (904 mm)
Height:
33.89" (861 mm)
Net Weight:
700 lb (318 kg)
Motor:
10 HP (7.5 kW)
Dimensional Drawing
Operating Principle
Model CC-DL
- Impeller Paddle
- Shredding Knife
Types of Cuts
FULL & REDUCED FLAT-V® SHREDS
Full Flat-V Shred
Hexagonal-shaped cross section thickness approximately .150" (3.8 mm) on each side using the .473 V knife.
Reduced Flat-V Shred
Flattened top and bottom that form a corrugated shred.
FULL SHREDS & REDUCED V SHREDS
Full Shred
Diamond-shaped cross section available in four thicknesses: .070" (1.8 mm) using the .125 V knife, .097" (2.5 mm) using the .170 V knife, .125" (3.2 mm) using the .212 V knife, or *.285" (7.2 mm) using the .445 V knife.
Reduced V Shred
“V”-shaped cross section
OVAL & REDUCED OVAL (CRESCENT) SHREDS
Oval Shred
Oval-shaped cross section approximately .125" (3.2 mm) thick by .250" (6.4 mm) wide using the .300 crinkle knife.
Wide Oval Shred
Wide oval-shaped cross section .125" (3.7 mm) thick by .375" (9.5 mm) wide using the .480 crinkle knife.
Crescent Shred
Crescent-shaped cross section.
Wide Crescent Shred
Wide crescent-shaped cross section.
FLAT-V® SLICES
Slice thickness range of .040"-.180" (1.0-4.6 mm) with 2.1 (25.4 mm) corrugations per inch. Corrugation depth of .125" (3.2 mm); Center depth: .473" (12 mm). Limited availability based on customer application. Contact your local Urschel office to verify salability.
Z-CUT SLICES
Slice thickness range is .030"-.115" (0.8 - 2.9 mm) with 2.54 corrugations per inch (25.4 mm). Corrugation depth is .135" (3.4 mm); Center depth: .394" (10 mm). Z-Cut is only available in non-European countries.
V SLICES
Slice thickness range is .040" (1.0 mm) to .500" (12.7 mm) available in two different "V" depths.
.125" Slice
8 “V’s” per inch, “V” depth of .050" (1.3 mm), Center depth: .125" (3.2 mm).
.212" Slice
4.7 “V’s” per inch, “V” depth of .084" (2.1 mm), Center depth: .212" (5.4 mm).
CRINKLE SLICES
Slice thickness range is .040" (1.0 mm) to .500" (12.7 mm). Available in three different crinkle depths.
.175" Slice
Crinkle depth .084" (2.1 mm), Center depth .175" (4.4 mm).
.300" Slice
Crinkle depth .080" (2.0 mm), Center depth .300" (7.6 mm).
.480" Slice
Crinkle depth .076" (1.9 mm), Center depth .480" (12.2 mm).
FLAT SLICES
Slice thickness range is .030" (0.8 mm) to .500" (12.7 mm).
STRIP CUTS
Rectangular cross section available in a variety of widths: 3/32, 1/8, 3/16, 1/4, 1/2, or 3/4" (2.4, 3.2, 4.8, 6.4, 12.7, or 19.1 mm).
GRATING OPTIONS
Grating heads offer cuts including powdered parmesan, coarse granules, and a variety of shreds.
Our Most Popular Machines