Urschel Laboratories, Inc. Linked In Urschel Laboratories, Inc. Facebook

Carrot Cutting Machines

Directions:
Click on a letter category from the alphabetical menu (left). Next double-click on a food item from the menu on the right.

A B C D - F
G - H J - L M - N O - P
Q - R S T - V W - Z
Go

Urschel vegetable shredders are designed to thinly slice or dice carrots, lettuce, cabbage, and other vegetables for salad preparation. Vegetable cutters are manufactured by Urschel Laboratories for the food processing and foodservice industry.

Note: Hundreds of pounds per hour up to thousands of pounds per hour; capacities vary depending on condition of materials, method of feeding, and other variables. Where capacities are listed, it is assumed product will flow in a smooth, uninterrupted manner through an Urschel® machine that is in optimum condition. Capacities listed are an indication of potential results.

Below you will find our selection of carrot processing machines. Each of the following fruit cutting machines offers different kinds of cuts.



E TranSlicer® Cutter   1/4" (3.2 mm) flat or crinkle slices. 3/8, 1/2, 3/4, 7/8, 1, 1-1/2, 1-3/4 , or 2" (9.5, 13, 19, 22, 25, 38, 44, or 51 mm) cuts. Proper feeding essential. Use optional top plate hold-down. Approximate hourly capacity: 15,000 lb (7,000 kg).
TranSlicer 2000® Cutter    1/4" (3.2 mm) flat or crinkle slices. 3/8, 1/2, 3/4, 7/8, 1, 1-1/2, 1-3/4 , or 2" (9.5, 13, 19, 22, 25, 38, 44, or 51 mm) cuts. Proper feeding essential. Use optional top plate hold-down. Approximate hourly capacity: 15,000 lb (7,000 kg).

TranSlicer® 2510 Cutter    1/8, 3/16, 1/4 (3.2, 4.8, 6.4 mm) slices. 3/8, 1/2, 1, 1-1/2, 2, 3, 3-1/2" (9.5, 13, 25, 38, 51, 76, 89 mm) cuts. Slight taper is typical on slices, unless a top plate is being used. Single file feeding method is recommended.

DiversaCut 2110® Dicer    1/8, 5/32, 3/16, 1/4, 5/16, 3/8, or 1/2" (3.2, 4.0, 4.8, 6.4, 7.9, 9.5, or 12.7 mm) strips and cubes and strips such as 1/8 x 1-1/2 x 1/4" (3.2 x 38.1 x 6.4 mm).

DiversaCut Sprint® Dicer    1/8, 5/32, 3/16, 1/4, 5/16, 3/8, or 1/2" (3.2, 4.0, 4.8, 6.4, 7.9, 9.5, or 12.7 mm) strips and cubes and strips such as 1/8 x 1-1/2 x 1/4" (3.2 x 38.1 x 6.4 mm).

QuantiCut® Dicer    5/32, 3/16, 1/4, 5/16, 3/8, 1/2" (4, 4.8, 6.4, 7.9, 9.5, 12.7 mm) strips and cubes and pieces such as 1/8 x 1-1/2 x 1/4" (3.2 x 38 x 6.4 mm).

Model G-A    1/4, 3/8, 7/16, 1/2, 5/8 or 1" (6.4, 9.5, 11, 13, 16 or 19 mm) cubes and pieces such as 1/4 x 1/4 x 1" (6.4 x 6.4 x 25 mm) or 1/8 x 3/8 x 3/8" (3.2 x 9.5 x 9.5 mm) from blanched carrots. Carrots exceeding 5-1/4" (130 mm) in length should be cut in half to ensure continuous high production of full size pieces. 5/32, 3/16 or 1/4" (4.0, 4.8 or 6.4 mm) square, strip cuts using special feed roll and circular knife spindles. Use preferably only blanched carrots.

Model GK-A    Plain cubes and pieces or cuts with 2 or 4 crinkle sides can be produced by proper selection of slicing and crosscut knives. Circular knives are suitable for smooth cuts only. Capacity and specifications are otherwise similar to the G-A Dicer.

Model RA-A    1/8, 5/32, 3/16, 1/4, 5/16 or 3/8" (3.2, 4.0, 4.8, 6.4, 7.9, or 9.5 mm) cubes and pieces such as 1/8 x 1/8 x 1/4" (3.2 x 3.2 x 6.4 mm) and 1/8 x 1/8 x 2" (3.2 x 3.2 x 51 mm) for salads and garnish. Carrots must be cut so that pieces do not exceed 4" (102 mm) in length for rapid feeding.

Model VSC Cutter    .250, .290, .313, .375, .438 or .500" (6.4, 7.4, 8.0, 9.5, 11 or 13 mm) square strips, slabs and segments.

Velocicut® Cutting Head    Variety of square strips, rectangular strips, and slab cuts. Blades are held together by tension and do not have a sharp edge. This head may be used in conjunction with the VSC Cutter or on types of water propelled systems.

Model CC    1/16, .100, or .125" (1.8, 2.5, 3.2 mm) square or oval shreds for salads and mixed slaw. Cut raw carrots into pieces 3-1/2" (90 mm) long for easy feeding into machine.

Model 30 Cutter    2" (51 mm) from small diameter peeled carrots. Use extra large hopper #39349 without fins.

Comitrol® Processor Line    A wide range of particle sizes suitable for soups, infant feeding, and special diet requirements can be obtained from raw, canned or frozen carrot pieces. Choose from wide selection of cutting head opening sizes for particle sizes larger than 1/64" (0.4 mm). Use microcut heads for finest degree of reduction. Pre-chop or -grind product to 1/4" (6.4 mm) or smaller and pump into the Processor for minimum aeration.

Comitrol® Processor 9300 with Feeder    Single pass thru the Comitrol Processor Model 9300 can eliminate several other pieces of equipment while producing smoother end product.


© 2014, Urschel Laboratories, Inc.
All rights reserved. / info@urschel.com
2503 Calumet Avenue
Valparaiso, IN 46384-2200 U.S.A
Phone: + 1.219.464.4811
Fax: + 1.219.462.3879